AllStyle Garage Doors in Adelaide are renowned for their sleek design, durability, and reliable performance – especially when it comes to their range of garage roller doors.
However, like all systems, garage door users can occasionally encounter some issues with using them. Some of the most common issues include a beeping door, flashing lights, and/or malfunctioning remote controls.
Being able to troubleshoot these issues can help save you time and money, as well as provide peace of mind. In this article, we will discuss some of the most common issues you might face with garage roller doors, as well as offer step-by-step solutions.
-
Why Is My Garage Roller Door Beeping?
If your roller door is beeping, do not worry – this is usually an early warning signal rather than a serious alert. Here are the most common reasons for the beeping:
Battery Low or Dead
If your garage roller door system includes a backup battery, a beeping sound usually indicates the battery in use is low or dead.
Solution: Check the battery compartment and replace the battery if necessary. The beeping should stop.
Obstruction in the Door’s Path
The beeping may also occur if the garage door’s sensors detect an obstruction in the door’s path.
Solution: Check for any objects blocking the door and remove them if found. If the problem persists, consider consulting a professional for further assistance.
Due for a Service
Similar to a vehicle, garage roller doors and their parts require regular servicing to ensure optimal performance and maintain longevity. In this case, your garage roller door opener will beep if the door is due for its scheduled maintenance.
Pro Tip: Consider subscribing to a regular professional maintenance programme to ensure you never miss out on your service amid your busy schedule.
-
Why Is My Garage Door Light Flashing?
A flashing light on your garage roller door opener is usually an indicator that something is amiss. Here are a few possible causes:
Sensor Alignment Issues
One of the most common reasons for a flashing light on residential garage roller doors is misaligned sensors. These sensors are located at the base of the garage door and are essential for safe operation. Any misalignment can prevent the door from closing properly.
Solution: Ensure the sensors are facing each other and are correctly aligned. They should be mounted at the same height and positioned directly opposite each other. Once realigned, the light should stop flashing.
Quick Tip: Use a spirit lever to ensure the sensors are perfectly aligned.
Obstruction or Debris
Dirt, leaves, or other debris blocking the sensors can also trigger a warning flashing light.
Solution: Clean the sensors with a soft cloth and ensure there is no obstruction in the door’s path.
Remote Control Issues
Sometimes, the flashing light can be linked to an issue with the remote control, such as a low battery or interference from other electronic devices.
Solution: Replace the remote batteries or move any electronic devices that may cause interference. If the problem persists, consider reprogramming the remote or calling an experienced garage door technician to take a look.
-
How Do I Reset my Garage Door Opener?
Resetting your roller door opener can resolve various minor issues, such as the door not opening or closing properly, and clear any errors or glitches in the system to restore normal operation.
Follow these simple steps to reset your garage door opener:
Step 1: Locate the “MODE” Button
Most garage doors have a “MODE” button on the back of the opener. This is typically a small, yellow button.
Step 2: Press and Hold the “MODE” Button
Press the “MODE” button repeatedly until the remote LED light is lit. Then, press and hold the button for 10 seconds until the lights on the opener stop flashing.
Step 3: Reset the Opener
Once the light stops flashing, press the “MODE” button again. Now, your opener is reset.
Step 4: Test the Opener
After resetting, use your remote or wall switch to test the opener’s functionality. If the door operates correctly, the reset is successful.
Pro Tip: If the reset button is difficult to find, consult your roller door manual or check with your service provider for specific instructions related to your model.
-
How Do I Program my Garage Door Remote?
Programming your roller door remote is a straightforward process that allows you to connect it to your door opener. Here is how you can do it:
Step 1: Locate the “CODE SET” Button
On your garage door opener, locate the “CODE SET” button. This button is usually found on the front of the opener, often under a clear plastic cover.
Step 2: Press the “CODE SET” Button
Press and hold the “CODE SET” button for two seconds and release.
Step 3: Program the Remote
Now, press and hold any available button on the remote for three seconds and release. Repeat this process by pressing and holding the same button for three seconds and releasing it. Your remote is now programmed.
Step 4: Test the Remote
Refit the plastic cover and press the buttons on the remote to test if it opens and closes the garage door. If it works, the remote is successfully connected.
This process can be repeated for multiple remotes if necessary, providing convenient access to your garage.
Quick Tip: Keep the remote away from electronic devices that might interfere with its signal, such as Wi-Fi routers or cordless phones.
-
How Do I Manually Open my Garage Roller Door?
Knowing how to operate your roller door manually is crucial in emergencies, ensuring you can still access your garage even when the automatic opener is not working during a power outage or a malfunction.
Here is how to do it:
Step 1: Locate the Manual Release Cord
Look for a red cord hanging from the motor unit. This is the manual release cord, which disengages the door from the automatic opener.
Step 2: Pull the Release Cord
Firmly pull the cord down until you hear or feel a click. This will disengage the door from the opener, allowing you to lift the door manually.
Step 3: Lift the Door
Once disengaged, carefully lift the garage door by hand. The door should move smoothly along the tracks. If the door is too heavy or difficult to lift, seek assistance.
Step 4: Re-engage the Opener
After manually opening or closing the door, pull the manual release cord away from the door until you hear or feel a click to re-engage the opener. Test the door to ensure it lifts and lowers correctly.
Pro Tip: If you frequently experience power outages, consider installing a battery backup system for your garage roller door opener.
Keep Your Garage Door Rolling Smoothly with AllStyle Garage Doors & Window Shutters
Troubleshooting common issues with garage roller doors does not have to be daunting, especially with these helpful tips. However, while these steps can address minor issues, it is important to remember that garage doors are complex. For safer and more effective solutions, it is always best to consult a professional.
As South Australia’s leading garage door company, AllStyle Garage Doors & Window Shutters offers a regular maintenance programme for garage roller doors and 24-hour repair service done by experienced and skilled technicians.
Our friendly team is ready to provide efficient assistance to ensure your garage roller door is in tip-top condition.
Get in touch with us today to learn more about our services and book a free consultation.